Ricoh FW770 - Manual (Page 14)

2
11. Main switch
Use this switch to turn the copier on and
off. The copier will need about 3 minutes
to warm up, if it's been turned off for a
long time.
12. Copy Exit Guide
Makes sure the copies don't fall off as
they come out.
Note
❒ Set the manual pocket as shown in the
figure.
13. Anti-humidity Heater Switch
When humidity is high, the paper in the
paper roll tray may absorb moisture,
which can effect the image quality of
your copies. The anti-humidity heater
prevents this. Turn on this switch, which
is located rear left corner of the machine,
when humidity is high.
⇒
P.9 “Anti-hu-
midity Heater”