Ricoh FW770 - Manual (Page 32)

Copying
20
2
❒ If you set the number of copies, Semi Synchro Cut can handle automatically
by the length at your setting for first copy.
❒ Do not use carrier sheet and rear table when you use Semi synchro cutting. A
fault might occur.
A
Press the
{{{{Cut Select}}}} key(1).
The Semi Synchro indicator lights up(2).
B
Choose any copy settings you require.
C
Make sure that the Wait indicator goes off and Ready and the Set Paper in-
dicator go on.
D
Press the
{{{{RF Select/Cut}}}} key to turn on the RF Select indicator.