Function select, Paper length, Leading edge – Ricoh FW770 User Manual
Page 16: Copy counter, Press to increase the value being edited, Press to decrease the value being edited, leading edge/copy counter, roll feeder, Light up when you select roll feeder 1 or 2, Rf select/cut
4
11.
{{{{Function Select}}}} key
Press to change which setting you are ed-
iting. The current selection is shown by
the indicators above the key:
• Paper Length
• Leading Edge
• Copy Counter
Also used for copying a selected portion
of the original.
12.
{{{{+}}}} and {{{{—}}}} key
Press to increase the value being edited.
Press to decrease the value being edited.
13.
Leading Edge/Copy Counter in-
dicator
Displays the margin settings and the
number of copies made.
14.
Roll Feeder indicator
Light up when you select Roll Feeder 1 or
2.
15.
{{{{RF Select/Cut}}}} key
Use to select the paper feed type (when
the Roll Feeder option is installed). Also
press to stop a copy job.
16.
{{{{Copy Media}}}} key
Press to select the type of copy paper you
are using.
The copier will apply more or less heat
accordingly.
• The top indicator-Translucent paper
indicator
• The bottom indicator-Film indicator
17.
{{{{Emergency Stop}}}} key
Press to stop the copying process imme-
diately.
Use if your original is getting stuck in the
copier.
If you stop operation by pressing this
key, remove both the original and paper.
18.
Density indicator and
{{{{i
i
i
i}
}}},
{
j
j
j
j}
}}}keys
Shows the density level the copies will
have.
Press the left key to make copies lighter.
Press the right key to make copies darker.
19.
{{{{Paper Feed}}}}key
Press to feed the paper.
Paper Feed indicator(LED) lights up
when the machine is ready to feed roll
paper.
20.
{{{{Clear/Stop}}}} key
When entering numbers, press to cancel.
While copying, press to stop copying.