Ricoh FW770 - Manual (Page 78)

Troubleshooting
66
5
Note
❒ Slide the cutter one way only, otherwise paper waste may pile up inside
the machine.
D
Rotate the paper roll in the direction of the arrow until you can see the edge
of the paper.
E
Turn the knob anticlockwise about 1/4 to adjust the paper position.
F
Slowly rotate the paper roll until the edge of the paper is fed into the rub-
ber part of the roller(
A A A A). While feeding the flap of the paper roll into the
rubber part of the roller, turn the paper knob clockwise(
B B B B).
Note
❒ Do not hold the paper knob from side. It may cause you touching a sticky
oil. For how to turn the knob without any harm, see the illustration below: