Areas prone to strong vibrations, Locations near a diazo copy machine, Power connection – Ricoh FW770 User Manual

Page 87: Table, Table body, Table row, Avoid multi-wiring, Do not set anything on the power cord, Voltage must not fluctuate more than 10, Make sure the copier is grounded

Advertising

Where to Put Your Copier

• Areas prone to strong vibrations
• Locations directly exposed to cool air from an air conditioner or heat from a

nearby heater(Sudden temperature changes may lead to condensation within
the copier.)

• Locations near a diazo copy machine.

Power Connection

WARNING:

CAUTION:

• Connect the copier to a power source meeting the specifications on the inside

front cover of this manual.

• Do not set anything on the power cord.
• Voltage must not fluctuate more than 10%.
• Make sure the copier is grounded.
• Make sure the plug is firmly inserted into the power outlet.

• Only connect the machine to the power source described on

the inside front cover of this manual.

• Avoid multi-wiring.

• Do not damage, break or make any modifications to the pow-

er cord. Do not place heavy objects on it, pull it hard or bend
it more than necessary. These actions could cause an elec-
tric shock or fire.

• Do not plug or unplug the power cord with your hands wet.

Otherwise, an electric shock might occur.

• Make sure the wall outlet is near the machine and freely ac-

cessible so that in event of an emergency it can be un-
plugged easily.

• When you move the machine, unplug the power cord from the

wall outlet to avoid fire or electric shock.

• When the machine will not be used for a long time, unplug the

power cord.

• When you pull out the plug from the socket, grip the plug to avoid

damaging the cord and causing fire or electric shock.

Advertising