Recalling settings stored in the program key, A press the, B enter the number of copies required with the – Ricoh FW770 User Manual
Page 48: C make a copy, B) changing the default setting, A turn off the main switch, B while holding down the, C input the settings you want, P.36 “b) changing the de, Fault setting
Advertising
Copy Settings
36
3
Recalling Settings Stored in the Program key
A
Press the
{{{{Program}}}} key before copying.
B
Enter the number of copies required with the
{{{{+}}}} and {{{{—}}}} key.
C
Make a copy.
B) Changing the Default Setting
A
Turn off the main switch.
B
While holding down the
{{{{Emergency Stop}}}} key, turn the copier back on.
The jam and service indicators will blink.
C
Input the settings you want.
Advertising