Ricoh FW770 - Manual (Page 42)

Copy Settings
30
3
Making Several Copies of the Same
Original
You can preset the number of copies (1 to 99) you want to make. Repeated cop-
ying means making two or more copies of an original. To make more than one
copy of the original, you have to reload the original after each copy. If you do
not have the optional Roll Feeder, you have to set the copy paper for each copy.
Note
❒ You can preset up to 99.
❒ Do not press the
{RF Select/Cut} key twice once you start preset cut with this
function. If you press the key twice, the copy job will be interrupted.
A
Press the
{{{{+}}}} and {{{{ −−−− }}}} keys to specify the number of copies.
When you press the
{Clear/Stop} key, the number of copies returns to "1".
B
Proceed as usual for a copy, with sheet paper (
⇒ ⇒ ⇒ ⇒
P.11), or with the Roll
Feeder (
⇒ ⇒ ⇒ ⇒
P.19).
C
When the copy comes out, remove it and repeat step
BBBB. Wait for the Set Pa-
per indicator to light up before loading a new sheet of paper, and wait for
the Set Original indicator to light up before reloading the original.