Ricoh FW770 - Manual (Page 68)

Maintaining Your Copier
56
4
❒ If applicable, adjust the roll paper position and lock the lever.
❒ You may hardly to adjust the roll paper position when you set 914mm (“36
). In this case, take out the paper holder, and then release the lock lever. Af-
ter you adjust it, put it back to the roll feeder.
❒ Do not force to remove the paper holder when you need to change the pa-
per size. For how to remove and set the paper holder, see
⇒
P.52 “Changing
The Roll Paper Size”
F
Rotate the paper roll slowly until the flap is almost fed into the rubber part
of the roller (
A A A A). While feeding the flap of the paper roll into the rubber
part of the roller, turn the paper knob clockwise (
B B B B).