Changing the roll paper size, Removing the roll paper holder, Graphic – Ricoh FW770 User Manual
Page 64: Setting the roll paper holder, Make sure the protrusions are firmly in the hole, B match the paper size in the windows, 4changing the roll paper size
Maintaining Your Copier
52
4
Changing The Roll Paper Size
Change the size guides on the left and
right of the roll paper holder when
you load different sized paper rolls.
Important
❒ Always follow the instructions be-
low when adjusting the roll paper
holder. Do not force the roll paper
holder by pulling or sliding it
strongly. This could damage the
holder.
Removing the Roll Paper
Holder
A
Push the paper holder inwards,
and then pull it upwards to re-
move it.
Note
❒ The paper holder is attached
with magnet and a hook.
❒ The paper holder is on the right
in this illustration.
Setting the Roll Paper Holder
A
Insert the hook on the paper hold-
er into (
A
A
A
A), and then insert the
protrusion into (
B
B
B
B).
Note
❒ Make sure the protrusions are
firmly in the hole.
❒ Lock the left side of the paper
holder until it clicks.
B
Match the paper size in the win-
dows .
Standard paper sizes that can be
used in this copier are shown be-
low.