Ricoh FW770 - Manual (Page 69)

Loading A Roll Of Paper
57
4
Note
❒ Do not hold the paper knob from side. It may cause you touching a sticky
oil. For how to turn the knob without any harm, see the illustration below:
❒ Make sure that the paper is not loose. Insert it straight into the roller.
❒ Watch carefully to make sure that the flap of the paper is inserted between
feeder and the roller.
❒ For how to change the Roll 2, refer to the following illustration:
G
Hold the paper (
B B B B ), and then slide the cutter (A A A A).
Note
❒ Slide the cutter one way only, otherwise paper waste may pile up inside
the machine.
H
Turn the knob anticlockwise about 1/4 to adjust the paper position.