Transition Networks MIL-SM2401MAF - Manual (Page 27)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
21
Port Commands Set
Commands
Command
Level
Description Defaults Example
Use the fast Ethernet
interface configuration
command
Switch (config)#
interface
fastEthernet 0/1
interface
[FastEthernet
/module
Ethernet] [slot
id] [id]
Interface
configuration
mode
Use the module
Ethernet interface
configuration
command
Switch (config)#
interface
moduleEthernet
1/1
Use the duplex
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
duplex full
duplex [full |
half| auto]
Interface
configuration
mode
Use the duplex
configuration
command to specify
the duplex mode of
operation for module
Ethernet.
Auto
Switch (config)#
interface
moduleEthernet
1/1
Switch (config-if)#
duplex full
speed
[10 | 100 | auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
speed 10