Transition Networks MIL-SM2401MAF - Manual (Page 29)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
23
priority on
[high | low] or
no priority
Interface
configuration
mode
Use the priority
configuration
command on Ethernet
ports.
Use the no form of this
command to disable
security on the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
priority on high
Bandwidth [in |
out] [value]
Interface
configuration
mode
Set bandwidth in or out
rate. The value rage is
(0~999), and zero of
the value is disable
(The module can’t be
setting)
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
bandwidth in 50
State [Enable |
Disable]
Interface
configuration
mode
Use the state interface
configuration
command to specify
the state mode of
operation for Ethernet
ports. Use the disable
form of this command
to disable the port.
Enable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
state disable