Transition Networks MIL-SM2401MAF - Manual (Page 82)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
76
ALL: Acceptable all Packet.
Tag Only: Only packets with matched VLAN ID have the permission to go
through the port.
And then, click Apply button.
802.1q VLAN – Port VLAN ID interface
Spanning Tree
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1d) for
avoiding loops in switched networks. When STP enabled, to ensure that only one path
at a time is active between any two nodes on the network. It’s recommended to enable
STP on all switches to ensure only one active path on the network.
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree
Protocol and provides for faster spanning tree convergence after a topology change.
The system also supports STP and the system will auto-detect the connected device
that is running STP or RSTP protocol.