Transition Networks MIL-SM2401MAF - Manual (Page 28)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
22
speed [10| 100 |
1000 | auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for module
Ethernet.
The 100Base-FX
module only
supported for speed
100
The 1000Base-FX
module only
supported for speed
1000 & auto
Switch (config)#
interface
fastEthernet 1/2
Switch (config-if)#
speed 1000
flowcontrol on
or no
flowcontrol
Interface
configuration
mode
Use the flow control
configuration
command on Ethernet
ports to control traffic
rates during
congestion.
Use the no form of this
command to disable
security on the port.
On
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
flowcontrol on
security on or
no security
Interface
configuration
mode
Use the security
configuration
command on Ethernet
ports.
Use the no form of this
command to disable
security on the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
security on