Transition Networks MIL-SM2401MAF - Manual (Page 83)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
77
System Configuration
User can choose the RSTP mode and view Root Bridge information.
Modifying STP state:
RSTP Mode: Set RSTP mode as 802.1d or 802.1w.
Priority (0-61440): The switch with the lowest value has the highest priority
and is selected as the root. If the value is changed, the user must reboot the
switch. The value must be a multiple of 4096 according to the protocol
standard rule.
Max Age (6-40): The number of seconds a switch waits without receiving
Spanning-tree Protocol configuration messages before attempting a
reconfiguration. Enter a value between 6 through 40.
Hello Time (1-10): The time that controls the switch to send out the BPDU
packet to check RSTP current status. Enter a value between 1 through 10.
Forward Delay Time (4-30): The number of seconds a port waits before
changing from its Rapid Spanning-Tree Protocol learning and listening states
to the forwarding state. Enter a value between 4 through 30.
And then, click Apply button.