Transition Networks MIL-SM2401MAF - Manual (Page 61)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
55
IP Address
Configure the IP address and DHCP client function.
DHCP Client: Enable or disable the DHCP client function. When DHCP client
function is enabled, the switch will be assigned an IP address from the network
DHCP server. Moreover, the default IP address will be replaced by the assigned
IP address on DHCP server. After the user clicks Apply button, a popup window
shows up. It is to inform the user that when the DHCP client is enabled, the current
IP will lose and the user should find the new IP on the DHCP server.
IP Address: Assign the switch IP address. The default IP is 192.168.1.77
Subnet Mask: Assign the switch IP subnet mask
Gateway: Assign the switch gateway. The default value is 192.168.1.254
And then, click Apply button
Reboot the switch
IP configuration interface
Switch Setting
Basic
Displays the switch basic information
System Name: Displays the name of the switch.
System Location: Displays the switch physical location.