Transition Networks MIL-SM2401MAF - Manual (Page 91)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
85
802.1X Configuration
When the IEEE 802.1X protocol is enabled, user can configure the parameters of
802.1X. To enable the IEEE 802.1X protocol, go to Administrator Switch Setting
Misc Config
System Configuration
Radius Server IP: Set the Radius Server IP address.
Server Port: Set the UDP destination port for authentication requests to the
specified Radius Server.
Accounting Port: Set the UDP destination port for accounting requests to
the specified Radius Server.
Shared Key: Set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server.
NAS, Identifier: Set the identifier for the radius client.
And then, click Apply button.
802.1x Configuration—System Configuration interface