Transition Networks MIL-SM2401MAF - Manual (Page 31)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
25
interface
[FastEthernet
/module
Ethernet] [slot
id] [id]
Interface
configuration
mode
Use the fast Ethernet
interface configuration
command
Switch (config)#
interface
fastEthernet 0/1
Trunk Commands Set
Commands
Command
Level
Description Defaults Example
show group
[group-ID]
Privileged
EXEC mode
Display trunk group
information. If there
is no group-number
in put, display all
trunk groups.
Switch # show
group 1
Group Trunk.1:
Ports: 02 03 04
Priority: 0001
Lacp: Enable
Work ports: 0
port group
[group-ID]
[port-list] lacp
[on | off] workp
[work ports]
no port group
[group-ID] lacp
[on | off] workp
[work ports]
Global
configuration
mode
Add trunking
group.
Use the no form of
this command to
delete trunking
group.
Disable
LACP:
Switch (config)#
port group 1 1-4
lacp on workp 2
Trunk without LACP:
Switch (config)#
port group 1 1-4
lacp off workp 4
port group
[group-ID]
activityport
[port ID]
Global
configuration
mode
Set trunking group
port active
Switch (config)#
port group 3
activityport 2-4
Trunk.1 Lacp: