Transition Networks MIL-SM2401MAF - Manual (Page 50)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
44
8021x misc
txperiod [sec.]
Or
no 8021x
txperiod
Global
configuration
mode
Use the 802.1x misc TX
period global
configuration command
to set the TX period.
Use the no form of this
command to return to
the default value.
30 sec.
Switch (config)#
8021x misc
txperiod 5
(Default)
Switch(config)# no
8021x misc
txperiod
8021x misc
supptimeout
[sec.]
Global
configuration
mode
Set the period of time
the switch wait for a
supplicant response to
an EAP request.
30 sec.
Switch (config)#
8021x misc
supptimeout 30
8021x misc
servertimeout
[sec.]
Global
configuration
mode
Set the period of time
the switch waits for a
server response to an
authentication request.
30 sec.
Switch (config)#
8021x misc
servertimeout 50
8021x misc
maxrequest
[Number]
Global
configuration
mode
Set the number of
authentication that must
time-out before
authentication fails and
the authentication
session ends.
2
Switch (config)#
8021x misc
maxrequest 2
8021x misc
reauthperiod
[sec.]
Global
configuration
mode
Set the period of time
after which clients
connected must be
re-authenticated.
3600
Switch(config)#
8021x misc
reauthperiod 20
8021x prostate
[reject | accept
| authorize |
disable]
Interface
configuration
mode
Use the 802.1x port
state interface
configuration command
to set the state of the
selected port.
N/A
Switch (config)#
interface
fastethernet 0/3
Switch (config-if)#
8021x portstate