Transition Networks MIL-SM2401MAF - Manual (Page 84)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
78
Spanning Tree – System Configuration interface
Per Port Configuration
Configure path cost and priority of every port
Select the port in Port column.
Path Cost: The cost of the path to the other bridge from this transmitting bridge at
the specified port. Enter a number 1 through 200,000,000.
Priority: Decide which port should be blocked by priority in LAN. Enter a number
0 through 240 (the port of the highest value will be blocked). The value of priority
must be the multiple of 16.
Admin P2P: Some of the rapid state transactions that are possible within RSTP
are dependent upon whether the port concerned can only be connected to exactly
one other bridge (i.e. it is served by a point-to-point LAN segment), or can be
connected to two or more bridges (i.e. it is served by a shared medium LAN
segment). This function allows the P2P status of the link to be manipulated
administratively. True is P2P enabling. False is P2P disabling.