Transition Networks MIL-SM2401MAF - Manual (Page 95)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
89
System Log Interface
Save Configuration
Save the configuration to the flash memory when the configurations have been
changed. If users want to keep their configuration after rebooting the switch, they must
save the configuration. Otherwise, the new configuration will be lost when the switch
restart or power off.
Click the Save Configuration button to save the configuration to the flash
memory.
Save Configuration Interface
TFTP Update Firmware
Use this page (TFTP—Trivial File Transfer Protocol) to configure to update the switch’s
flash image bank.
Place the updated image file on the TFTP server.
TFTP Server IP Address: Key in TFTP server IP address.
Firmware File Name: The name of firmware image.
And then, click Apply button; the switch will download the new image file from
TFTP server.