Transition Networks MIL-SM2401MAF - Manual (Page 39)

Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
33
no form of this
command to return
to the default
interval.
spanning-tree
hello-time
[seconds]
Global
configuration
mode
Use the
spanning-tree
hello-time global
configuration
command to specify
the interval
between hello
bridge protocol data
units (BPDUs). Use
the no form of this
command to return
to the default
interval.
2 sec.
Switch (config)#
spanning-tree
hello-time 3
stp-path-cost
[number]
Interface
configuration
mode
Use the
spanning-tree cost
interface
configuration
command to set the
path cost for
Spanning Tree
Protocol (STP)
calculations. In the
event of a loop,
spanning tree
considers the path
cost when selecting
an interface to
place into the
10 Mbps
– 100
100 Mbps
– 10
Switch (config)#
interface
fastEthernet 0/2
Switch (config-if)#
stp-path-cost 20