TANDBERG E5714 - Manual (Page 112)

Operating the Equipment Locally
Page 4-34 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Table 4.25: Frame Rate Options
Selected Option Description
29.97 Hz Used in 525 lines (NTSC-M + PAL-M).
25 Hz Used in 625 lines (PAL).
Video Locked Option
This option indicates whether the video is locked. It is for status only and
cannot be changed.
Ident Text Option
To access the Ident Text option, press the Ident Text softkey from the
Video
Source Menu. This is the text that is displayed if the video output is
lost (see OP Video Loss Option, on page 4-35).
Text Colour Option
To access the Text Colour option, press the Text Colour softkey from the
Video
Source Menu. This gives a choice of colours for the text which is
displayed when the video output is lost (if that option has been selected).
Table 4.26: Text Colour Options
Available Options
White Blue Magenta Yellow Green Pink
Black Red Orange Grey Cyan
Background Colour Option
To access the Background Colour option, press the Background Colour
softkey from the Video Source Menu. This gives a choice of colours for the
background to the text which is displayed when the video output is lost (if
that option has been selected).
CAUTION…
Make the background colour a contrast to the text otherwise the text will not be seen!
Table 4.27: Background Colour Options
Available Options
White Blue Magenta Yellow Green Pink
Black Red Orange Grey Cyan
Video Bandwidth Option
NOTE…
This option is available in Build version 2.1.0 and later.
The Video Bandwidth Option controls the filtering of the video before it is
compressed. Reducing the bandwidth requires slightly less bits in the
compressed bit-stream. Refer to ST.AN.BW.E10074 for more information.