M2/eom2/qpskdemod, qpsk demodulator card option – TANDBERG E5714 User Manual
Page 262
Technical Specification
Page B-26
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card
Option
NOTE…
The M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option is supported by Encoder software
version 3.1 and later.
Table B.42: IF In (QPSK Demodulator)
Item
Specification
Safety Status:
SELV
Connector Type:
BNC Female
Connector Designation:
IF IN
Input Impedance:
75
W
Input Power:
-20 dBm to –40 dBm
Input Frequency:
50 MHz to 180 MHz
Capture Range:
Up to ± 5 MHz
Signal Type:
BPSK as per ETSI TR 101 198 (option)
QPSK as per EN 300 421 (DVB-S)
Symbol Rate:
1 – 45 Msym/s (0.3 – 45 Msym/s optionally)
Table B.43: RF In (QPSK Demodulator)
Item
Specification
Safety Status:
SELV
Connector Type:
F-type Female
Connector Designation:
RF1, RF 2
Input Impedance:
75
W
Input Power:
-25 dBm to –65 dBm
Input Frequency:
950 MHz to 2150 MHz
Capture Range:
Up to ± 5 MHz
Signal Type:
BPSK as per ETSI TR 101 198 (option)
QPSK as per EN 300 421 (DVB-S)
Symbol Rate:
1 – 45 Msym/s (0.3 – 45 Msym/s optionally)