TANDBERG E5714 - Manual (Page 150)

Operating the Equipment Locally
Page 4-72 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
4.11.2 Output Format Option
To access the Output Format option, press the Output Format softkey in
the Output Menu. The menus available depend upon which option cards are
fitted to the unit.
If the Output Format option = ASI then the following menu option is
Delivery Descriptor, otherwise it is the menu associated with the output
format selected, i.e. satellite modulator, OFDM modulator or IP Output.
4.11.3 Delivery Descriptor Menu
To access the Delivery Descriptor Menu, press the Delivery
Descriptor softkey in the Output Menu. The screens in this menu vary
according to the Descriptor Type selected.
4.11.4 Descriptor Type Option
To access the Descriptor Type option, press the Descriptor Type softkey
in the Delivery Descriptor Menu. This enables the descriptor type to be
specified.
Table 4.71: Descriptor Type Options
Selected Option Description Comments
Satellite Descriptor type set to Satellite.
Terrestrial Descriptor type set to Terrestrial.
None
Cable Descriptor type set to Cable.
The type of delivery descriptor
selected affects the remaining
options shown on the Delivery
Descriptor Menu.
4.11.5 Descriptor Type = Terrestrial
Band Plan Option
To access the Band Plan option, press the Band Plan softkey in the
Delivery Descriptor
Menu.
Once a country has been selected then the required channel should be
selected in the Channel option. Each channel number corresponds to a
particular frequency (see Annex F, Band Plans).