VXI VT1422A User Manual
Page 415
VT1422A Command Reference 413
Command Quick Reference
SENse:FUNCtion (continued)
:RESistance <excite_current>,[<range>,](@<ch_list>)
Configure channels to sense resistance measurements
:STRain
Links measurement channels as having read bridge voltage from:
:FBENding [<range>,](@<ch_list>)
Full BENding
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:FBPoisson [<range>,](@<ch_list>)
Full Bending Poisson
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:FPOisson [<range>,](@<ch_list>)
Full POisson
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:HBENding [<range>,](@<ch_list>)
Half BENding
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:HPOisson [<range>,](@<ch_list>)
Half Poisson
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
[:QUARter] [<range>,](@<ch_list>)
QUARter
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:Q120 [<range>,](@<ch_list>)
Quarter bridge with the 120
Ω resistor selected (VT1529A/B only)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:Q350 [<range>,](@<ch_list>)
Quarter bridge with the 350
Ω resistor selected (VT1529A/B only)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
:USER [<range>,](@<ch_list>)
Quarter bridge with the user supplied resistor selected (VT1529A/B only)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Links post-processing strain EU conversion with specified VT1529B channels
RTD, 85 | 92
RTDs
TCouple, CUST | E | EEXT | J | K | N | S | T
thermocouples
THERmistor, 2250 | 5000 | 10000
thermistors
:TEMPerature <sensor_type>,<sub_type>,
[<range>,](@<ch_list>)
Configure channels for temperature measurement types above:
excitation current comes from Current Output SCP.
:POST TC, <sub_type>,[<range>,](@<ch_list>)
Links VT1529B channels to post-processing temperature EU conversion
:TOTalize (@<ch_list>)
Configure channels to count digital state transitions
:VOLTage[:DC] [<range>,](@<ch_list>)
Configure channels for dc voltage measurement
RTD, 85 | 92
RTDs
THERmistor,5000
thermistors
REFerence <sensor_type>,<sub_type>,[<range>,](@<ch_list>)
Configure channel for reference temperature measurements above:
:POST THERmistor, <resistance>,[<range>],
(@<exc_ch>),(@<thr_ch>)
Links thermistor channel to excitation voltage channel and to reference
junction temperature EU conversion
:CHANnels (@<ref_channel>),(@<ch_list>)
Groups reference temperature channel with TC measurement channels
:POST (@ref_channel>), (@<ch_list>)
Links thermocouple channels to temperature reference (thermistor) channel
:TEMPerature <degrees_c>
Specifies the temperature of a controlled temperature reference junction
:POST <degrees_c>, (@<ch_list>)
Stores fixed reference junction temperature for post-processing EU
conversions for specified thermocouple channels
:THERmistor
:RESistance:POST <resistance>, (@<thr_list>)
Specifies sum of resistor values in thermistor divider circuit for specified
thermistor channels when using VT1529B for temperature measurements
:RESistance:POST? (@<thr_ch>)
Returns programmed sum of resistor values in thermistor divider circuit
SCPI Command Quick Reference
Command
Description