VXI VT1422A User Manual
Page 462
460 Error Messages
3103
'Algorithm swapping already enabled; Can't change size.'
Only send <swap_size> parameter on initial definition.
3104
'GLOBALS can't be enabled for swapping.' Don't send
<swap_size> parameter for ALG:DEF 'GLOBALS'.
3105
'Invalid SCP switch setting.'
3106
'E1536A debounce.' Ch list must contain all lower
4 and/or upper 4 channels.
3107
'Channel data direction conflicts with command.'
Check switches that hardware-define data direction
(configure channel as input or output).
3108
'E1536A debounce.' Each referenced 4 Ch debounce
bank must contain at least one input channel.
3110
'Channel specified is invalid for RVELocity function.'
See the VT1538A SCP manual.
3111
'Multiple channels are specified in the reference
channel list.' See the VT1538A SCP manual.
3112
'Channel specified is invalid for RPULse reference
channel.' See the VT1538A SCP manual.
3113
'Channel specified is not on the same SCP as reference
channel.' See the VT1538A SCP manual.
3114
'First channel on SCP cannot be used in RPULse output
channel list.' See the VT1538A SCP manual.
3115
'Channels specified are not in ascending order.'
See the VT1538A SCP manual.
3116
'Multiple channels specified are not grouped correctly.'
See the VT1538A SCP manual.
3117
'Grouped channels are not adjacent.' See the VT1538A
SCP manual.
3118
'Incomplete setup information for RPULse function.'
See the VT1538A SCP manual.
3119
'RPULse reference channel must be defined as
RVELocity type.' See the VT1538A SCP manual.
3120
'Minimum velocity parameter must not exceed
maximum velocity parameter.' See the VT1538A
SCP manual.
3121
'Query invalid for current channel usage with the
configured RPULse mode.' See the VT1538A
SCP manual.