VXI VT1422A - Manual (Page 333)

VT1422A Command Reference 331 Chapter 7
[SENSe]
:TEMPerature <sensor_type>,<sub_type>,[<range>,](@<ch_list>)
:POST TC,<sub_type>,[<range>,](@<ch_list>)
:TOTalize (@<ch_list>)
:VOLTage[:DC] [<range>,](@<ch_list>)
REFerence <sensor_type>, [<sub_type>,](@<ch_list>)
:POST THERmistor,<res>,[<range>],(@<exc_ch>),(@<thr_ch>)
:CHANnels (@<ref_channel>),(@<ch_list>)
:POST (@<ref_channel>),(@<ch_list>)
:TEMPerature <degrees_celsius>
:POST <degrees_celsius>,(@<ch_list>)
:THERmistor
:RESistance
:POST? <resistance>,(@<thr_list>)
STRain
:BRIDge
:TYPE FBEN | HBEN | Q120 | Q350 | USER,(@<ch_list>)
:TYPE? (@<channel>)
CONNect BRIDge | EXCitation,(@<ch_list>)
CONNect? (@<channel>)
:EXCitation <excite_v>,(@<ch_list>)
:STATe ON | OFF,(@<ch_list>)
:STATe? (@<channel>)
:EXCitation? (@<channel>)
:GFACtor <gage_factor>,(@<ch_list>)
:GFACtor? (@<channel>)
:POISson <poisson_ratio>,(@<ch_list>)
:POISson? (@<channel>)
:UNSTrained <unstrained_v>,(@<ch_list>)
:UNSTrained? (@<channel>)
TOTalize:RESet:MODE INIT | TRIGger,(@<ch_list>)
TOTalize:RESet:MODE? (@<channel>)
[SENSe:]DATA:CVTable?
[SENSe:]DATA:CVTable? (@<element_list>) returns from the Current Value
Table the most recent values stored by algorithms.
Parameters
Comments •
[SENSe:]DATA:CVTable? (@<element_list>) allows the latest values from
algorithms and/or analog scans to be "viewed."
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
element_list channel list 10 - 511 none