VXI VT1422A - Manual (Page 370)

368 VT1422A Command Reference Chapter 7
[SENSe]
[SENSe:]STRain:POISson
[SENSe:]STRain:POISson <poisson_ratio>,(@<ch_list>) sets the Poisson ratio
to be used for EU conversion of values measured on sense channels specified
by <ch_list>.
Parameters
Comments •
The <ch_list> parameter must specify channels used to sense strain bridge
output, not channel positions on a Bridge Completion SCP.
•
Related Commands: FUNC:STRAIN
…, STRAIN:POISson?
•
*RST Condition: Poisson ratio is .3
•
Send with VXIplug&play Function: hpe1422_cmd(...)
Usage STRAIN:POISSON .5,(@124:131)
set Poisson ratio for sense channels
24 through 31
[SENSe:]STRain:POISson?
[SENSe:]STRain:POISson? (@<channel>) returns the Poisson ratio currently set
for the sense channel specified by <channel>.
Parameters
Comments •
Returned Value: numeric value of the Poisson ratio. The data type is float32.
•
The <channel> parameter must specify a single channel only.
•
Related Commands: FUNC:STRAIN
…, STRAIN:POISSON
•
Send with VXIplug&play Function: hpe1422_cmdReal64_Q(...)
Usage STRAIN:POISSON? (@131)
query for the Poisson ratio specified for
sense channel 31
enter statement here
enter the Poisson ratio value
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
poisson_ratio numeric (float32) 0.1 - 0.5 none
ch_list channel list (string) 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel channel list (string) 100 - 163 none