VXI VT1422A - Manual (Page 372)

370 VT1422A Command Reference Chapter 7
[SENSe]
•
Related Commands: STRAIN:UNST
•
Send with VXIplug&play Function: hpe1422_cmdReal64_Q(...)
Usage STRAIN:UNST? (@107)
query unstrained voltage for channel 7
enter statement here
returns the unstrained voltage set by
STR:UNST
[SENSe:]TOTalize:RESet:MODE
[SENSe:]TOTalize:RESet:MODE <select>,<ch_list> sets the mode for resetting
totalizer channels in <ch_list>.
Parameters
Comments •
In the INIT mode the total is reset only when the INITiate command is executed.
In the TRIGger mode the total is reset every time a new scan is triggered.
•
If the channels specified are not on a Frequency/Totalize SCP, an error will
be generated.
•
Related Commands: SENS:FUNC:TOT, INPUT:POLARITY
•
*RST Condition: SENS:TOT:RESET:MODE INIT
•
Send with VXIplug&play Function: hpe1422_cmd(...)
Usage SENS:TOT:RESET:MODE TRIG,(@134)
totalizer at channel 34 resets at each
trigger event
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
select discrete (string) INIT | TRIGger seconds
ch_list string 100 - 163 none