VistaQuest N7227V5 User Manual

Page 10

Advertising
background image

– 10 –

Optional Output Relays

• Up to 4 relays using one 4204 Relay Module.

• Actions programmable to respond to zone activity or manual keypad entries.

Optional Phone module

• Supports the Ademco 4285 Phone module .

• Provides access to the system via on premises or off-premises phones for

arming, disarming, etc., plus control of relay outputs.

Optional Long Range

Radio

• Allows all messages that have been programmed to go to the primary

telephone number to be reported additionally to a 7720 PLUS or 7820 radio.

Alarm Output

Provides a 12VDC, 2 AMP output that can drive the compatible sounders

listed in the EXTERNAL SOUNDERS section (assumes a fully charged
battery is connected).

• Steady output for Burglary/Panic, or temporal pulse sounding output for Fire

notification, as required by UL.

• Uses current limiting circuitry for protection.

Auxiliary Power Output

• Provides 12VDC, 500mA maximum. Uses current limiting circuitry for

protection.

• This output interrupts for smoke detector reset if 4-wire smoke detectors are

used.

Programming

• Programmed options are stored in electrically erasable, non-volatile EEROM

memory (information can be reprogrammed at any time and will not be lost in
the event of a power loss).

• The system can be uploaded, downloaded, or controlled via an IBM

compatible computer, using either Ademco’s V-Link® downloading software
(Rev. 4 or higher) or Ademco’s

Compass Windows downloading software,

and a HAYES modem specified by Ademco.
Keypad programming consists of:

Data field programming.

Interactive (menu) mode programming.

For programming from a keypad, a 5137AD or 6139 2-line Alpha keypad
must be connected (but need not necessarily stay in the system).

Communication Formats

Supported

• Ademco Low Speed (Standard or Expanded).

• Sescoa/Radionics (Standard or Expanded).

• Ademco Express.

• Ademco Contact ID.

Zone Descriptors

You can assign Alpha descriptors to all zones (useful only when using Alpha
keypads and/or the 4285 Phone module).

AC Power Supply

Uses No. 1321, 120VAC plug-in transformer with 16.5VAC 25VA output.
(1321CN in Canada)

Back-Up Battery

• Rechargeable (Gel type) 12VDC, 4AH minimum.

Advertising