VistaQuest N7227V5 - Manual (Page 65)

– 65 –
3+1/4+1 3+1/4+1
Report Standard Expanded 4+2
Alarm SSS(S) A SSS(S) A SSSS AZ
AAA(A) Z
Trouble SSS(S) T SSS(S) T SSSS Tt
TTT(T) t
Bypass SSS(S) B SSS(S) B SSSS Bb
BBB(B) b
AC Loss SSS(S) E SSS(S) E SSSS EA C
EEE(E) A C
Low Batt SSS(S) L SSS(S) L SSSS LL B
LLL(L) L B
Open SSS(S) O SSS(S) O SSSS OU
OOO(O) U
Close SSS(S) C SSS(S) C SSSS CU
CCC(C) U
Test SSS(S) G SSS(S) G SSSS Gg
GGG(G)g
Restore SSS(S) R SSS(S) R SSSS RZ
Alarm RRR(R) Z
AC Restore SSS(S) R A SSS(S) R A SSSSR A Ac
RARARA(RA)Ac
LoBat Res. SSS(S) R L SSS(S) R L SSSS RLLB
RLRLRL(RL)LB
Trouble Res. SSS(S) R T SSS(S) R T SSSS RTt
RTRTRT (RT)t
Bypass Res. SSS(S) R B SSS(S) R B SSSS RBb
RBRBRB (RB)b
Where:
Where:
SSS or SSSS = Subscriber ID C = Close Code–1st Digit
A = Alarm Code–1st digit U = User Number (in hex)
Z = Typically Zone Number*–2nd digit G g = Test Code (1st & 2nd digits)
T t = Trouble Code (1st & 2nd digits) R = Restore Code (Alarm)
Bb = Bypass Code (1st & 2nd digits) R T t = Restore Code (Trbl)1st & 2nd digits
EAC = AC Loss Code (1st & 2nd digits) R Bb = Restore Code (Byps)1st & 2nd digits
LLB = Low Battery Code(1st & 2nd digits) R AAC = Restore Code (AC)1st & 2nd digits
O = Open Code–1st Digit R LLB = Restore Code (Bat)1st & 2nd digits
*Zone numbers for: [ ✱ ] & [#], or [B] = 99 [1] + [ ✱ ], or [A] = 95 Duress = 8
[3] + [#], or [C] = 96 Tamper = 9
Ademco Contact ID Reporting takes the following format:
CCCC Q EEE GG ZZZ
where: CCCC = Customer (subscriber) ID
Q = Event qualifier, where:
E = new event , and R = restore
EEE = Event code (3 hexadecimal digits)
Note:
For a complete list of event codes, refer to the
central office receiver manual.
GG = Always 00.
ZZZ = Zone/contact ID number reporting the alarm, or user
number for open/close reports. System status
messages (AC Loss, Walk Test, etc.) contain zeroes
in the ZZZ loca tion.