Westell Technologies 2200 - Manual (Page 124)

030-300354 Rev. B 120 July 2003
Section 16-Help
Westell Dual Connect NAT Router User Guide
Selection box This box contains the devices available to share the Single Static IP address the
ISP has assigned the modem. The names listed in the select box will be
populated by the modem’s DHCP server based on DHCP requests. If a device’s
name cannot be determined, the current IP address of the device will be placed
in the list.
When the feature is enabled, the active machine will be highlighted in the select
box and be displayed at the bottom of the page with the “disable” button.
When the feature is disabled, no device in the select box will be highlighted and
the “enable” button will be available.
When the “User Configured PC” is selected, a local PC must be configured
manually with the WAN IP address as its Ethernet adapter’s address.
U
User Name
This screen is asks for information that will allow the Router to make a connection to the ISP on your behalf. The
Router will need to know your Account ID and Account Password. This information is stored in the Router.
User Name
Connection Name
This is a description of the default connection profile, which the Router will use.
Feel free to use whatever description you desire.
Account ID Your Account Id is supplied by your ISP and is a text string that uniquely
identifies you with your ISP.
Account Password The Account Password is a key phrase or text string that verifies your identify to
the ISP.
V
VC Configuration
VC Configuration Screen
VC Configuration This screen is an advanced screen. Modifying parameters on this screen can
cause severe disruption of your service. VC stands for “Virtual Connection.” A
VC identifies a connection through the service provider’s ATM network to your
ISP. It is not recommended that anything be changed on these pages unless
explicitly instructed by your service provider.
VPI/VCI
VPI/VCI
VPI/VCI This screen asks for information that the Router needs to establish a
communication channel to your ISP. The VPI and VCI values are supplied by
your ISP.