Westell Technologies 2200 - Manual (Page 34)

030-300354 Rev. B 30 July 2003
Section 8-Configuring the Router for Internet Connection
Westell Dual Connect NAT Router User Guide
When the SET-UP COMPLETE screen appears, you have successfully completed your Account Profile setup.
Click on done.
DHCP customers may now surf the Internet.
8.2 Establishing a PPP Session
View the Connection Rate at the Connection Overview section in the following Home page. If this status reads No
DSL Connection, check the DSL physical connection, which is explained in section 5 (INSTALLING THE
HARDWARE).
NOTE: If no DSL sync is established, the connect button will not be displayed. To determine if the DSL sync is
established, check the Router’s DSL LED. If the DSL LED is not solid green, you do not have a DSL link
established. Contact your ISP for details.
The screen below shows the connection rate with values that indicate a successful SYNC has been established. The
connection rate values represent the transmission speed of your DSL line. (The Router may take time to report the
values.) Click on the Connect button to establish a PPP session.