Westell Technologies 2200 - Manual (Page 86)

030-300354 Rev. B 82 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
If you select Edit in the preceding Firewall Configuration screen, the User Defined Firewall Rules screen will be
displayed. This screen allows you to change the security parameters on your Inbound and Outbound Firewall rules
via the User Defined Firewall Rules pull-down arrow. To apply the new settings, click on Apply in the screen
labeled User Defined Firewall Rules.
If you clicked Apply in the User Define Firewall Rules screen, the following pop-up screen will be displayed.
Click on OK if you want your new firewall setting to take effect. If you click on Cancel, your new firewall settings
will not take effect.
The information displayed in this screen depends
on the level of security you have selected.