Westell Technologies 2200 - Manual (Page 74)

030-300354 Rev. B 70 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
12.7.2 Disabling Single Static IP
To disable Single Static IP, select Single Static IP Configuration from the Configuration menu. Next, select your
device (from the options displayed in the window). Click on disable.
STOP! After you enable Single Static IP, you must reboot your computer.
If you clicked on disable in the preceding screen, the following pop-up screen will be displayed. Click on OK.
If you clicked on OK in the Disable IP Passthrough? screen, the following pop-up screen will be displayed. Click
on OK. This will allow the modem to be reset and the new configuration will take effect.