System requirements, Minimum system requirements for usb installation, 2 minimum system requirements for usb installation – Westell Technologies 2200 User Manual

Page 8

Advertising
background image

030-300354 Rev. B

4

July 2003

Section 4-System Requirements

Westell Dual Connect NAT Router

User Guide

4. SYSTEM REQUIREMENTS

4.1 Minimum System Requirements for 10/100 Base-T/Ethernet Installation

The following system specifications are required for optimum performance of the Dual Connect NAT Router via
10/100 Base-T installation:

• Pentium

®

or equivalent and above class machines, Macintosh

• Microsoft

®

Windows

®

(98, 2000, ME, NT 4.0, or XP) or

Macintosh

®

OS X installed

• Computer Operating System CD-ROM on hand

• Internet Explorer 4.x or Netscape Navigator 4.x or higher

• 64 MB RAM (128 MB recommended)

• 10 MB of free hard drive space

• TCP/IP Protocol stack installed

• 10/100 Base-T Network Interface Card (NIC)

4.2 Minimum System Requirements for USB Installation

The following system specifications are required for optimum performance of the Dual Connect NAT Router via
USB installation:

• Pentium

®

or equivalent and above class machines

• Microsoft

®

Windows

®

98, 2000, ME, or XP installed

• Computer Operating System CD-ROM on hand

• Internet Explorer 4.x or Netscape Navigator 4.x or higher

• 64 MB RAM (128 MB recommended)

• 10 MB of free hard drive space

• USB Version 1.0 or 1.1 compliant bus

• An available USB Port



Advertising