Westell Technologies 2200 - Manual (Page 93)

030-300354 Rev. B 89 July 2003
Section 13-Setting Up Advanced Service Configuration
Westell Dual Connect NAT Router User Guide
13.5 Static NAT
To configure you Router for Static NAT, click on the static NAT button in the Service Configuration screen.
NOTE: Static NAT will allow you to configure your Router to work with the special NAT services.
13.6 Enabling Static NAT
If you clicked on static NAT in the Service Configuration screen, the following screen will be displayed. Select
your device name from the Static NAT Device pull-down arrow and click on enable in the Static NAT screen. This
will automatically enable the Static NAT feature for that device. Then, the Service Configuration screen will be
displayed.