Westell Technologies 2200 - Manual (Page 53)

030-300354 Rev. B 49 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
The following settings will be displayed if you select edit from your VC Configuration menu on any of your
existing VC (Virtual Connections) settings. If you change any of your existing VC settings, click on Set VC.
NOTE: If you experience any problems, please reset your Router via the external hardware re-set button or via the
procedure defined under the Maintenance menu.
This screen is divided into two parts for illustrative purposes.
NOTE: The actual information displayed in this screen may vary, depending on network connection established.
If you have made any changes to your VC settings, you need to save them. To save the new VC settings, click on
OK when asked Set this PPPoE VC configuration? If you click on cancel, the new VC settings will not be saved.