Westell Technologies 2200 - Manual (Page 89)

030-300354 Rev. B 85 July 2003
Section 13-Setting Up Advanced Service Configuration
Westell Dual Connect NAT Router User Guide
13. SETTING UP ADVANCED SERVICE CONFIGURATION
You can set up additional Service Configuration options for your NAT Router that allow you to enter the port
forwarding and trigger ports ranges of your choice. Go to Configuration at the homepage menu and select Service
Configuration.
When you click on define custom service in the Service Configuration screen, the Custom Service screen will
guide you through the steps of creating an advanced NAT service entry via the define custom service button.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please reset your Router via the external hardware re-set button or the procedure defined under the
Maintenance menu.
Port Forwarding Ranges of Ports
This option allows you to forward a range of WAN ports to an IP address on
the LAN.
Trigger Ports This option allows you to forward a range of ports to an IP address on the
LAN only after specific outbound traffic.