Westell Technologies 2200 - Manual (Page 64)

030-300354 Rev. B 60 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
12.3.2 Enabling the DHCP Server
If you want to enable your DHCP Server settings, select Private LAN at the DHCP Server pull-down arrow.
If you selected Private LAN, the following screen will be displayed. Click on save to save your DHCP Server
setting. If you click on reset, your DHCP Server will be reset to factory default. (Private LAN is the factory default
for the DHCP Server.)
If you clicked on save, in the preceding DHCP Configuration screen, the following pop-up screen will appear.
Click on OK.