Westell Technologies 2200 - Manual (Page 47)

030-300354 Rev. B 43 July 2003
Section 10-HOME
Westell Dual Connect NAT Router User Guide
Connection Overview Displays your DSL connection rate.
Connection Name This Connection Name is from the connection profile that you established in section 8.
PPP Status UP = PPP session established
DOWN = No PPP session established.
Connect/Disconnect CONNECT = Establish a PPP session
DISCONNECT = Disconnect a PPP session
Profile Editor This allows you to make changes to the profile that you created in section 8.
10.2 Adding Account Profiles
If you select the Profile Editor button from your Home page, the Advanced Home screen will appear, as shown
below. Click on the new connection button in the Advanced Home screen. The New Connection screen will
appear. Enter your account profile and click on New. Next, click on OK in the pop-up screen to save your new
connection. If you don’t want to add a connection profile, click on Close in the New Connection screen. You can
store up to eight unique user profiles in your Router. Details on the New Connection screen are located at the end of
this section.
If you select Edit from the Connection Overview screen, the Edit “My Connection” screen will appear. Follow
the steps in the Edit “My Connection” screen to change your existing connection profile, which you set up in
section 8. If you don’t want to change your connection profile, click on close in the screen. Click on delete if you
want to delete your connection profile.