Westell Technologies 2200 - Manual (Page 21)

030-300354 Rev. B 17 July 2003
Section 6-Installing the USB Drivers
Westell Dual Connect NAT Router User Guide
3. Windows ME: The window below confirms that the PC has finished loading the drivers. See Figure 19. Click
Finish.
Figure 19. Found New Hardware
4. Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly. See
Figure 20. Click Yes.
Figure 20. Restart the Computer
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, the Router is ready for use. You must now go to section 7.