Xerox 4520 - Manual (Page 115)

S y s t e m M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-61
Auto Continue Off*
On
Control of the resumption of printing after system
errors occur.
Certain errors may occur that halt printer operations.
Two examples are:
Out of Memory
and
Page Too Complex.
When Auto Continue is Off , the printer does not
automatically resume. Enter must be pressed
before normal printer operations can continue.
When Auto Continue is On , the printer automatically
resumes operation after certain system errors if
Enter is not pressed within ten seconds. The
On setting is useful in a networked environment .
Defaults Europe
USA Control of default paper size settings in various
menus.
There is no standard factory-set default for this
option; the default varies by world region.
When Europe , all paper size-related options are set to
A4 (210x297) and Form Length is set to 64.
When USA , all paper size-related options are set to
Letter (8.5x11) and Form Length is set to 60.
The Config. Sheet (page 3-64) is printed at Defaults
size, regardless of actual paper size.
Perform a Reset Menus (page 3-68) after
changing Defaults .
Figure 3.18 System Menu options showing factory settings (continued)
Option Setting Description
Note
WUG-CH03 Page 61 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM