Xerox 4520 - Manual (Page 54)

S e l e c t i n g a P a p e r S o u r c e
2-42 ❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
You do not have a MBF or HCF installed. You want to use
pre-printed stationery for the first page and regular stock for
the other pages of your document. Your software application
has the capability to ask for the first page of a document from
a different source than the rest of the document. (The Xerox
PCL 5e emulation Windows printer driver also has this
capability.) It is assumed your pre-printed stationery is the
same size as your regular stock.
1. Load the upper and middle trays with the regular paper
stock.
2. Load the lower tray with the pre-printed stationery.
3. Set Source Mapping for “Upper” to “Upper-Middle.”
4. Set Source Mapping for “Lower” to “Lower.”
5. In either your software application or the Xerox PCL 5e
emulation Windows printer driver, set paper source for
the first page to Lower and set paper source for the
remaining pages to Upper.
The printer will pull the first page from the lower tray and
all other pages from the upper then middle trays.
Example 7
WUG-CH02 Page 42 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM