Xerox 4520 - Manual (Page 183)

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
C h a p t e r 7 : T r o u b l e s h o o t i n g ❖ 7-9
Fuser Failure
Service Required Fuser assembly has failed; printing cannot resume.
ACTION: Contact your dealer or Xerox / Rank Xerox.
HCEF Envelopes need to be added to the High-Capacity Envelope Feeder (HCEF).
ACTION: The message on the bottom advises what envelope to load.
HCEF-Mid-Low HCEF, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Middle HCEF or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Lower HCEF or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Low HCEF, upper, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Mid HCEF, upper, or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Mid-Low HCEF, upper, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Upper HCEF or upper tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF Empty The HCEF does not contain paper.
ACTION: Load envelopes into the HCEF.
HCF Paper needs to be added to the High-Capacity Feeder (HCF).
ACTION: The message on the bottom advises what paper to load.
Figure 7.2 Control Panel messages (continued)
Message Description/Action
WUG-CH07 Page 9 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM