Xerox 4520 User Manual
Page 120
T e s t M e n u
3-66
❖
4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
Test Print
“Test pattern” for analysis of print quality over the entire page; intended for use by
service technician.
The number of Test Prints produced is determined by
Copies
(page 3-19) and
printed from the
Default
Source
(page 3-21), both specified in the PCL Menu. If
the System menu setting
Defaults
(page 3-61) is
USA
, Letter (8.5x11) paper is
used; otherwise, A4 paper is used.
Test Print
will cause a printer reset, clearing any incomplete jobs.
Memory Check
Complete check of printer memory (resident and any SIMMs installed) and a
reporting of the results on the Control Panel display.
Memory Check
is more extensive than the check performed when the printer is
powered on. When you invoke
Memory Check
, you will see:
Memory Check
Please Wait....
Before
Memory Check
, any partial pages are ejected and any incomplete print
jobs, permanently downloaded fonts, and macros are cleared from memory. After
Memory Check
is finished, it reboots the printer to its power-on state.
If a problem occurs, the Control Panel will display a numeric diagnostic code. See
Chapter 7: Troubleshooting,
“Displayed Control Panel Messages” (page 7-5),
to
locate the diagnostic message associated with the numeric code.
Figure 3.20 Test Menu functions
(continued)
Function
Description
WUG-CH03 Page 66 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM