Xerox 4520 User Manual

Page 189

Advertising
background image

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s

C h a p t e r 7 : T r o u b l e s h o o t i n g

7-15

Page Too Complex

In PCL, the printing on a page is broken up into horizontal bands. When

Page

Protection

is

Off

, as a page is processed, each band has a limited time to be

composed and imprinted on the page.

Page Too Complex

means the current

page cannot print because there is not enough time to compose it.

ACTION: Press

Enter

The page will be ejected and the print job will

continue. The page that was too complex will be printed on more than one sheet
of paper. To achieve printing on one sheet, set

Page Protection

(page 3-26) to

the appropriate page size and send the print job again.

Even though

Auto Continue

(page 3-59) may be

On

, you will see the message

below for ten seconds:

Press *

The printer waits ten seconds, then resumes (in effect, pressing

Enter

for

you).

Paper Fed From
Lower Tray

In paper jam condition, paper was fed (or intended to be fed) from the lower tray.

ACTION: This message alternates at 5-second intervals with a message to clear the
paper path by opening a rear cover. See

“Paper Jams” (page 7-27)

.

Paper Fed From
Middle Tray

In paper jam condition, paper was fed (or intended to be fed) from the middle tray.

ACTION: This message alternates at 5-second intervals with a message to clear the
paper path by opening a rear cover. See

“Paper Jams” (page 7-27)

.

Paper Fed From
Upper Tray

In paper jam condition, paper was fed (or intended to be fed) from the upper tray.

ACTION: This message alternates at 5-second intervals with a message to clear the
paper path by opening a rear cover. See

“Paper Jams” (page 7-27)

.

Paper Jam MBF
Clear Paper Path

Printer has a paper jam at the Multi-sheet Bypass Feeder (MBF).

ACTION: Push button located on the underside of the MBF (to release paper feed
rollers); remove paper.

PCL Font List
Printing...

PCL Font List

(page 3-65) is printing.

ACTION: None

[blank]

Please Wait...

The LocalTalk card (XNIC-L’TALK) is being initialized as part of the LocalTalk
network.

ACTION: None

Figure 7.2

Control Panel messages

(continued)

Message

Description/Action

WUG-CH07 Page 15 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM

Advertising
This manual is related to the following products: