Xerox 4520 - Manual (Page 74)

P C L M e n u
3-20 ❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
Font Number 0* - 999 Default font in PCL.
Only Font Number values valid for the Font Source
location (page 3-19) are displayed. For example, if you
have
internal fonts only, the maximum Font Number
is 56.
Font Number values are printed on the PCL Font
List (page 3-65) in the first column. Print a PCL Font
List to find the correct number to use with this
setting.
The Font Number setting returns to its
factory setting (0) if the Symbol Set
(page 3-25) default is changed.
If the Font Source setting (page 3-19)
specifies a location other than
“Internal,”
Font Number reverts to 0
automatically.
Pitch .44 - 99.99 by .01
(
10.00* )
Number of characters per inch (cpi) for the font
represented by
Font Number (page 3-20).
Appears only when the Font Number setting
specifies a scalable fixed pitch font, such as Courier.
Up increments pitch at .01 cpi, from .44 to
99.99 cpi. Down decrements at .01 cpi.
Most software applications override this setting. If
your application does not, the printer assumes the
default setting here.
Figure 3.8 PCL Menu options showing factory settings (continued)
Option Setting Description
Note
WUG-CH03 Page 20 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM