Xerox 4520 - Manual (Page 38)

L o a d i n g P a p e r
2-26 ❖ 4 5 2 0 / 4 5 2 0 m p U s e r ’ s G u i d e
Figure 2.12 shows SBF paper orientation. To print properly,
paper is inserted either long edge or short edge first.
The SBF guides indicate in a general way where to position
the paper. All sizes are centered in the SBF.
If you are experiencing skew on the output, review
the instructions above and be sure each step is being
followed; check to be sure that the entire lead edge of
the sheet has bottomed out (the sheet should have a
slight buckle along the entire width).
Figure 2.12 Long or short edge paper orientation
Paper Size Long or Short Edge First
A4 Long
Letter (8.5 x 11) Long
B5 (ISO) Long
B4 (ISO) Short
Executive Long
A5 Long
Folio (8.5 x 13) Short
Legal (8.5 x 14) Short
Ledger (11 x 17) Short
A3 Short
Com-10 Short
DL Short
C5 Short
Note
WUG-CH02 Page 26 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM